In the woods of Vermont, George Sawyer continues a family tradition of hand-making Windsor chairs.
By Annie Graves
May 29 2019
George Sawyer in his Woodbury, Vermont, workshop.
Photo Credit : Oliver PariniI step inside the creaky workshop tucked behind a no-nonsense 1860s farmhouse in the hinterlands of Woodbury, Vermont, an hour and a half from the Canadian border. Dust motes drift over old wooden tools, workbenches, and bits of carvings. Strong, honest lines carry their own poetry, and here, where the ceiling is decked out in random chairs and slung with cobwebs that remind me of beach hammocks, George Sawyer, 37, is building on his father’s legacy of simple beauty: the art and craft of fashioning Windsors.
“It feels like home to me,” George says, his nod encompassing the stuff dangling from beams; the artful calipers, chisels, and hand drills; the lathe that dozes in the corner.
George lives a mile down the road, but this house has been in the family of his mother, Susan, since the early 1930s. His father, David, converted the living room (once a woodshed) into a workshop in the mid-’70s. “Dad was primarily self-taught,” he explains. “There was a group of folks doing green woodworking then. He was making pitchforks, ladder-back chairs—that’s how he got started making chairs.”
The art of making chairs from green wood goes back centuries—moist wood is kinder to hand tools than, say, kiln- or air-dried. George quickly teases out the first inklings of a spindle by splitting a fresh piece of ash with a brake and a froe, tools that allow him to guide the split. With the rough piece in hand, we cross the workshop to the shave horse—a kind of cobbler’s bench—where he scrapes the wood from four sides to eight, then to 16. “The first thing I teach is how to read the grain,” he says, referencing the chair-making classes he leads. Day one is making spindles. “I don’t care if the piece is straight or not—it’s more important that it be strong.”
By 1982, David Sawyer had decided to make something more complicated than pitchforks. “He moved on to Windsor chairs,” George says. “That was the year I was born.” George grew up hearing the sound of metal scraping on wood, playing in piles of wood shavings that flew off the lathe as it turned chair legs, and sitting in a Windsor child’s chair that his father made. He shows me two other chairs: his brother’s and his sister’s. Of the former, “It’s sort of agreed upon in the chair community that this is the best one out there,” he says proudly, admiring the graceful swoop of wood.
Still, apart from helping out in the workshop as he grew up (and making lots of wooden swords), George headed off in his own direction: first to the Rhode Island School of Design, then working at an architecture firm and designing ski helmets, and moving around the country. But in 2012, “my dad started to talk about retiring,” he remembers. “I couldn’t picture this shop without somebody building chairs in it.”
By that time, George had moved back to Vermont. He started learning from his father, working with him part-time. “He’s very patient. And pretty hands-off,” George says. “He would show me, and then go take a nap. And let me struggle. And then come back, and give me pointers.” He laughs. “And go away again.”
The first five or six chairs were a challenge, but George stuck with it. “And I still ask him questions. The chairs are complicated. And there are a lot of different styles.” He opens a drawer and pulls out his father’s drawings: exquisite renderings of each chair, “to give you an idea how much thinking goes into it. He was a draftsman—he figured out every last angle, every last dimension. I still work off of these.”
But it’s not until George starts explaining the chair seat—with its elegant pommel—that I begin to fully appreciate the complexity of making something so beautifully simple. There are angles for drilling leg holes (19 and 20 degrees), and sight lines to consider, and bevel gauges to contend with. “Finding this sight line when you’re designing a chair is a bit of trigonometry, like wizardry,” he says. He confesses to using a CAD program when designing (a modern perk). I confess to blanking out while he’s talking.
And then I ask him where his child’s chair is. I’ve seen his brother’s. And his sister’s. “I don’t know,” he admits. “It was loaned out to another kid, no one can remember who. I’m sure it’ll come back—they always do.” He pauses. He and his wife, Erin, have a toddler, Theo. If that chair doesn’t resurface…. “Oh, I’m planning on making one,” he assures me. “I’ve been looking for a pattern. Every kid should have their own chair, right?”
For more information, go to sawyermade.com.
A New Hampshire native, Annie has been a writer and editor for over 25 years, while also composing music and writing young adult novels.
More by Annie Graves